A flash flood warning was released by the National Weather Service on Sunday at 1:21 p.m. in effect until 3:15 p.m. for Cullman County.

“At 1:21 p.m., Emergency Management reported flash flooding along several roadways in Good Hope, and parts of County Road 436 are washed out near County Road 318. Between 2 and 3 inches of rain have fallen. The expected rainfall rate is 0.5 to 1.5 inches in 1 hour,” according to the weather service. “Flash flooding of small creeks and streams, urban areas, highways, streets and underpasses as well as other poor drainage and low-lying areas.”

Locations impacted by the warning include Cullman, Hanceville, Good Hope, Holly Pond, Baldwin, Vinemont, West Point, Phelan, Walter, Logan and Jones Chapel.

The weather service states, “Turn around, don’t drown when encountering flooded roads. Most flood deaths occur in vehicles. Be aware of your surroundings and do not drive on flooded roads.”

Your guide to weather alerts: advisories, watches, and warnings

• Flash flood warning: Take action!

A flash flood warning is issued when a flash flood is imminent or occurring. If you are in a flood-prone area, move immediately to high ground. A flash flood is a sudden violent flood that can take from minutes to hours to develop. It is even possible to experience a flash flood in areas not immediately receiving rain.

• Flood warning: Take action!

A flood warning is declared when flooding is on the verge of happening or is already underway.

• Flood advisory: Be aware:

A flood advisory is released when flooding is not expected to reach a severity level necessitating a warning. Nonetheless, it can still cause considerable inconvenience and, without exercising caution, potentially lead to situations that threaten life and/or property.

• Flood watch: Be prepared:

A flood watch is issued when conditions are favorable for flooding. It doesn’t guarantee that flooding will occur, but it signifies that the possibility exists.

Staying safe during a flood: Recommendations from the weather service

In flood-prone regions or while camping in low-lying areas, understanding and following the weather service flood safety guidelines can be a lifesaver:

Move to higher ground:

If you reside in a flood-prone region or are camping in low-lying terrain, the first step to safety is relocating to higher ground.

Adhere to evacuation orders:

When local authorities issue an evacuation order, promptly comply. Before leaving, secure your home by locking it.

Disconnect utilities and appliances:

If time permits, disconnect your utilities and appliances. This precaution minimizes electrical hazards during flooding.

Steer clear of flooded basements and submerged areas:

Avoid basements or rooms submerged in water with electrical outlets or cords. Preventing electrical accidents is crucial.

Evacuate promptly for safety:

If you notice sparks or hear buzzing, crackling, snapping, or popping sounds, evacuate without delay. Do not enter water that may carry an electrical charge.

Stay away from floodwaters:

Never attempt to walk through floodwaters. Even just 6 inches of swiftly moving water can forcefully knock you off your feet.

Seek high ground if trapped:

Should you become trapped by moving water, reach the highest point possible and dial 911 to contact emergency services.

During periods of intense rainfall, the risk of flooding increases, particularly in low-lying and flood-prone areas. It is imperative to avoid driving through any water on the road, even if it seems shallow. According to the weather service, most cars can be swept away by just 12 inches of rushing water. Stay safe by being prepared and informed.

Mastering wet roads: Safety tips for heavy rainfall

When heavy rain sets in, the risk of flooding and hazardous driving conditions rises. Whether it’s prolonged rainfall or rapid runoff, being prepared is essential. Here are some valuable safety tips from the weather service to ensure you stay safe in heavy rain:

Beware of rapid water flow:

Avoid parking or walking in close proximity to culverts or drainage ditches, as the swiftly moving water during heavy rain can potentially carry you away.

Maintain safe driving distances:

Adhere to the two-second rule for maintaining a safe following distance behind the vehicle in front of you. In heavy rain, allow an additional two seconds of distance to compensate for reduced traction and braking effectiveness.

Reduce speed and drive cautiously:

If it is raining and the roads are wet, slow down. Take your foot off the accelerator and let your speed drop gradually. Never use the brakes suddenly because this may cause the car to skid.

Choose your lane wisely:

Stick to the middle lanes to minimize the risk of hydroplaning. Outer lanes are more prone to accumulating water.

Prioritize visibility:

Enhance your visibility in heavy rain by turning on your headlights. Watch out for vehicles in blind spots, as rain-smeared windows can obscure them.

Watch out for slippery roads:

Be extra careful during the first half hour after rain begins. Grime and oil on the road surface mix with water to make the road slippery.

Keep a safe distance from large vehicles:

Don’t follow large trucks or buses too closely. The spray created by their large tires reduces your vision. Take care when passing them as well; if you must pass, do so quickly and safely.

Mind your windshield wipers:

• Overloaded wiper blades can hinder visibility. If rain severely impairs your vision, pull over and wait for conditions to improve. Seek refuge at rest areas or sheltered spots.
• When stopping by the roadside is your only option, position your vehicle as far off the road as possible, ideally beyond guardrails. Keep your headlights on and activate emergency flashers to alert other drivers of your position.

In the face of heavy rain, these precautions can make a significant difference in ensuring your safety on the road. Remember to stay informed about weather conditions and heed guidance from local authorities for a secure journey.

Advance Local Weather Alerts is a service provided by United Robots, which uses machine learning to compile the latest data from the National Weather Service.